<noframes id="1vfbl">

<noframes id="1vfbl"><listing id="1vfbl"><listing id="1vfbl"></listing></listing>
<form id="1vfbl"><th id="1vfbl"><progress id="1vfbl"></progress></th></form>
<form id="1vfbl"><th id="1vfbl"><th id="1vfbl"></th></th></form>

      產品中心
      分享到:
      壓力噴霧干燥機

      壓力噴霧干燥機

      噴霧干燥物料咨詢單
      Spray-drying material advisory single
      Customer Name and Address
      (客戶名稱) :__________________________________________
      (地址) :___________________________________________________________________________
      Telephone(電話)15957324153   E-mail(郵箱)______________Telefax( 傳真)____  
      Location of Plant(廠址)______________________________________________________
      1.  MATERIAL TO BE DRIED(干燥物料)
           Name(名稱)                   ____________________________________
           Chemical composition(化學成分) _______________________________________
                                            
      2.  PRODUCT CAPACITY(產品處理能力)
            Output of dried product, kg per hour
           (干燥產品產量,千克 / 每小時)  
            Operating hours per year/ week/ day
           (操作時間 小時 / 每年/每周/每天)  _______________________________
      3.   FEED(進料)
             Feed type (cake, emulsion, paste,
             solution, suspension, moist solids)
             進料狀態(餅狀,乳化狀,膏狀,溶液,
             懸浮液):  __________________________________________________________
             Is material pumpable?
             此物質是否可以用泵輸送?Viscosity (粘度) 0.1~1.0 Pa•s  at (溫度) :   。
             Is material abrasive?
             此物質是否具有磨蝕性?_______________________________
             Solids content in feed, % on total basis
             進料含固量,重量比%: _______________________________
             Maximum temperature of feed with no
             product deterioration, ℃
         可容許無損壞產品的高進料溫度℃: _______________________________
      4.    END PRODUCT (后產品)
             Moisture % on total basis (method of analysis)
             余水量%(計算方法)     _______________________________________
             Max. dry product temperature, ℃
             可容許高產品溫度℃: _______________________________
             Desired mean particle size, microns
             (method of analysis)
             要求平均顆粒大小,微米(分析方法): _______________________________
      Desired particle form (agglomerate, granulate,
             powder)
             要求產品顆粒形態(附聚,顆粒,粉末): _______________________________
             Desired bulk density, kg/m3
             要求產品堆密度,千克/每立 : _______________________________
      5.    MATERIALS OF CONSTRUCTION(制造材料)
             Parts in contact with feed(與進料接觸部分): _______________________________
             Parts in contact with dry product (與產品接觸部分)     ___________________________________
      6.    HEATING(加熱)
      我們準備采用天然氣加熱方式:
       Gas(Natural gas, City gas ,Water Coal gas)(天然氣,城市煤氣,水煤氣)
             Pressure at plant, bar (abs.)                   Net calorific value, kJ/Nm3
             壓力巴(絕壓) ___________________________熱值,大卡/立方米____關于加熱這一點可滿足產要求!______________ _
      8.     LOCAL CONDITIONS(當地氣候條件)
               Winter (冬天)平均氣溫____5_____℃ Relative humidity(相對濕度)_
               Summer(夏天)平均氣溫 ____℃  Relative humidity(相對濕度):  _ 
               Altitude, m above sea level海拔 (米): _________________________________
      9.     ENVIRONMENTAL RESTRICTIONS(環保要求)
               Max. solids emission in exhaust air, mg/Nm3
               高廢氣含塵量,毫克/立方米            _______________________________________
               Max. noise level at given distance dBA, 1m
               大噪音限制(一米處,dBA): _____________________________________
       
      10.    PRESENT PRODUCTION(生產現狀)
                Existing drying equipment, type (目前干燥設備種類)_ ______________ _____
                Pretreatment of feed (進料預處理設備)    _______________ _______
                After treatment of dried product
                干燥后產品的后加工設備         ____________________________________
                Application of dried product干燥產品的應用     _____________________________________
      11.     ASPECTS OF HEALTH AND SAFETY 健康安全方面
                Will the product processed on Niro plant be used
                for human consumption?
                經尼魯設備加工的產品是否用于人們日常消耗?                         ______________________________________
                Is it possible that the product, as particles
                suspended in air, can form an explosive or
                flammable mixture?
                該產品顆粒懸浮在空氣中是否可能爆炸或易燃? _____________________________________
                Is the product considered hazardous, because it is  該產品是否有如下因素認為是危險品?
                Toxic (有毒)                           _____________________________________
                Carcinogenic(致癌)                  __ ____________________________________
                Mutagenic(誘變)                      ___________________________________
                Corrosive(腐蝕性)                    ______________________________________
                Irritant(刺激性)                 _ ______________________________________
                Oxidant(氧化劑)                      ____________________________________
                Unstable (reactive)不穩定性               ___________________________________
                Water reactive(與水反應)         __________________________________
                Pyrophoric(自燃性)  __________________________________
      12.    MATERIAL SAFETY DATE SHEET (MSDS) 材料安全數據表
                Is customer’s sheet available? (客戶是否提供此表格)Yes 是□   No 不□
                If so please attach. (如果是的話,請附上)
         
      Date (日期)_ __________________________   Name (姓名) 
       
      Title (職稱)_ _____________________________       Signature (簽名)
      天陽干燥手機網
      點擊下載或掃描
      日韩东京热无码人妻,色就色亚欧美,2020久久超碰国产精品最新,6080新觉伦午夜中文字幕|青青国产揄拍视频|中文字幕Av一区